Gear Box Drive C Channel Roll Forming Machine With 10.3 × 1.5 × 1.2 M
Parameter
| Thickness | 1.5-3.0mm |
| Speed | 10m/min |
| Material of the roller | steel Cr15 |
| Roller | 20 stations |
| Principal axis | steel No.45 |
| Electric motor | 11kw |
| Hydrodynamic station cut | 7.5KW |
| Drive-by-wire system | PLC industrial computer |
| Size | 10.3×1.5×1.2 |
| Gross weight | 15 T |
| Driving system | gear box drive |
Machine list
| Machine list | 3 ton passive Uncoiler | 1 set |
| Main roll forming machine | 1 set |
| Control box | 1 unit |
| Hydraulic station | 1 unit |
| Out table 1500mm | 2 unit |
| Hydraulic punching and cutting device | 2 unit |
| Hydraulic cutting device | 1 unit |
Festures
1. This machine adopts the material shelf with a style of cantilever and opening umbrella to put material with no dynamic force. It can adjust the end of the screw mandrel of the material shelf to fit in with steel of different apertures. Easy to operating and its speed of putting materials and the main mounding machine is in phase.
2. This machine adopts Seven Rolls level correction, roll arbors adopt high-quality alloyed steel 40Cr, made with a heat treatment, and it has a perfect effectiveness of level correction to defect band steel.
3. The roller of the principal machine adopts the bearing steel GCr15 to strike, distressing to annealing, quenching, tempering, and Parkerizing, such heat treatment process.
4. The set of machine change the specification by using semicircle retaining ring to adjust. It is convenient for the workers to operate them.
5. Punching structure is of a high-degree automatically system, under the control of computers which have been set beforehand, it can finish wherever technical punching with ease.
Machine list
Product Tags:
|
|
Gear Box Drive C Channel Roll Forming Machine With 10.3 × 1.5 × 1.2 M Images
|
